Knowledge Base / Interfaces
Interfaces
Disable remote GUI access
Yes, by disabling the Remote management Flag from the WAN/s interface page.Refer also to the belo...

+1Gbps requires 10Gbe LAN or WAN Fiber Optic Card
For 2Gbps, we have to use 10Gbe as LAN NIC since we do not provide port bonding.We need to know t...

Can the WAN interface of the FatPipe be on multiple tagged VLANs?
No. Although the WAN interface(s) of the FatPipe supports VLAN tagging - it can only be tagg...

I have a link thats been known to get a fair amount of traffic from questionable places on the internet, looking to make some exploits happen -How can I mitigate my exposure here?
The wan exposed services (E.G. ICMP, Web, DNS, Etc.) can be toggled on & off from the individ...

I have an adjacent network element that for whatever reason is unwilling to participate in ARP & Only wants to do business with 1 MAC, can I do MAC Spoofing on the Fatpipe?
Yes! In the Ethernet section of the GUI for whichever interface is in question, you can click on...

I have some concerns about an adjacent network element taking Layer2 ethernet errors, how can I review the performance metrics here?
If you go to Tools > Diagnostics > System Information, this will give you the normal ifconf...

I just got a new MetroE link, and the carrier is telling me I need to have my edge gear participate as a member of Tagged VLAN WXYZ -How do I accomplish this?
From the Wan interface in question, if you click the check box for "Enable" in the VLAN area &...

I'd like to disable management access to wans for the internet as a whole, but Id still like to be able to have our Ops/Engineering team be able to manage the device without needing to VPN in from home, is this doable?
Yes, as long as you know the IP's they would be coming from -Configure this in the access list, f...

I've got some hosts that are part of the Passthru subnet that need to be on the Wan side of the Fatpipe for whatever reason, how do I accomplish this in software since I tried it just in hardware & it tells me theres an IP conflict?
If you make the subnet on that interface to be something larger than 30 bit, then adjust your inb...

The spot on our network where we keep track of Carriers/Circuit ID's/Contact numbers at the moment seems to be having some issues, is there anywhere on the Fatpipe I can put some of this information?
On the individual Wan interfaces in the Fatpipe GUI, there is both a ISP Name & Notes field w...

What can we expect in terms of bandwidth given the availability of different internet providers?
(This is for a non MPSEC FatPipe to FatPipe scenario - addresses sessions going to the Internet)T...



Powered by LiveZilla Customer Support Software